Home › Guides › Grants › Guide › Article

Article · Grants · 6 min read

How to write an NSF SBIR proposal for an AI company

A strong NSF SBIR or STTR application is won or lost on whether the work is genuine high-risk research, not on polished marketing prose. This article is a writing and process guide for the Project Pitch and the Phase I full proposal. For eligibility, award amounts and deadlines, start with our article on NSF SBIR and STTR for AI startups.

Write the Project Pitch first

For eligibility, award amounts and deadlines, see NSF SBIR and STTR for AI startups. You cannot submit a Phase I or Fast-Track full proposal until NSF has invited you, on the back of a Project Pitch [source]. Registrations in SAM, Research.gov and the SBA Company Registry are not required for the pitch, but they are required for the full proposal, and SAM can take up to three weeks, so it is sensible to start them in parallel if you have not done them before [source] [source].

NSF looks for a breakthrough technical innovation, unproven high-risk R&D, a large potential impact, a sustainable technical advantage, commercial potential, and a team that can do the work. If the project is straightforward engineering or incremental product development, NSF says it is not a fit [source]. For an AI company, that usually means you should be able to state the scientific or engineering uncertainty you will resolve in Phase I, not only the product you hope to sell.

The pitch has four sections, with published character limits [source]:

  1. The Technology Innovation (up to 3,500 characters). Explain the core high-risk technical innovation for Phase I, the R&D required, and how it differs from existing solutions. Describing features or benefits is not sufficient.
  2. The Technical Objectives and Challenges (up to 3,500 characters). Set out the specific research needed to show that the foundational technology works, the challenges, and how you will manage them.
  3. The Market Opportunity (up to 1,750 characters). Who the customer is, why they would adopt the innovation, and a high-level view of the competitive landscape.
  4. The Company and Team (up to 1,750 characters). Why this team can do the R&D, and how you will fill any gaps. NSF also wants to see motivation to commercialise.

A company may submit only one pitch at a time, a maximum of two in any 12-month window, and a maximum of three in total for the same project. NSF typically responds in about one to two months [source] [source].

The full proposal: what you actually submit

If you are invited, you submit through Research.gov, under the current solicitation (NSF 26-510 or, if it applies, NSF 26-511). The official contents list includes a cover sheet, the SBIR or STTR questionnaire and certification questions, a project summary, the project description, references, budget and budget justification, facilities and resources, senior and key personnel documents, a data-management and sharing plan, and the supplementary documents described below [source]. In a conflict between the solicitation and the NSF Proposal and Award Policies and Procedures Guide, the solicitation wins.

Writing constraints that regularly catch people out [source]:

  • The project summary is a maximum of one page, written in the third person, with headings for Overview, Intellectual Merit and Broader Impacts. It should not be an abstract of the proposal, and it must not include proprietary information.
  • The project description must not exceed 15 pages for Phase I or Phase II (16 pages for Fast-Track). Do not put URLs or websites in the project description; cite them in References Cited instead. Reviewers are not required to follow links.
  • Do not upload marketing materials, papers, patent applications, videos, slides or appendices beyond what the solicitation expressly permits.
  • Do not ask for more than the maximum award. For Phase I that maximum is $305,000 [source].

Mark genuine proprietary passages clearly, if you have them. NSF says an entire proposal should not be marked proprietary. Properly marked technical and commercially sensitive data is protected from disclosure for not less than 20 years from the delivery of the last report or proposal on the project [source].

Letters of support and other documents

Phase I proposals require at least one letter of support, and may include a maximum of three [source]. NSF wants market validation from potential customers, strategic partners or investors: an indication that a real business opportunity may exist if the technology works, and that you have started that conversation. Letters that are personal endorsements of the team or of the technology are, NSF says, less useful. Letters must include the signatory's affiliation and contact details. Letters of commitment from consultants or subcontractors do not count as letters of support [source].

Other documents that often apply [source] [source]:

  • Letters of commitment from subawardees and consultants are strongly recommended, and should state the subaward amount.
  • An IP rights agreement is required for STTR (a draft, or a named statement that one will be provided, is acceptable at submission). It is strongly recommended for SBIR proposals that include a subaward to another institution.
  • A resubmission change description is required if this is a revised version of a declined proposal. You also need a new invited Project Pitch, and the revision must be substantial [source] [source].
  • A company commercialisation history is required if you have had a previous federal SBIR or STTR Phase II award, using NSF's template only.

Build the budget to the rules, then justify it

The Phase I budget cannot exceed $305,000, and the award may last 6 to 18 months [source] [source]. For SBIR Phase I, at least two-thirds of the total budget must be allocated to the small business. For STTR, at least 40% must stay with the small business and at least 30% must go to the partner research institution [source]. NSF's about page also notes that intellectual property, marketing and business-development costs are not covered [source].

Each budget, including each subaward budget, needs its own budget justification, with a five-page limit. Every non-zero line should be described, with calculations for salary, time commitment and fringe, and with equipment defined as NSF defines it [source]. SBIR Phase I proposals have one PI and no co-PIs; STTR proposals have a PI at the company and a co-PI at the research institution [source].

Give yourself time for SAM.gov. NSF says the process is free and can take up to three weeks, and that you should request financial-assistance authority only. You must have an active SAM registration before you can enter the proposal in Research.gov. Register the company name and address identically in SAM, Research.gov and the SBA Company Registry [source] [source].

A short checklist before you submit

  1. Read the live solicitation (NSF 26-510 or NSF 26-511) and confirm you still have a valid invitation for this window.
  2. Confirm the work is unproven, high-risk R&D, and that you have said what experiment or prototype will test it in Phase I.
  3. Count the pages: project summary one page, project description at most 15 pages, budget justification at most five pages each.
  4. Check the budget cap and the SBIR or STTR split, and remove ineligible cost categories.
  5. Include at least one, and at most three, letters of support that speak to a market opportunity.
  6. Submit by 5 p.m. in the submitting organisation's local time on the deadline date. After 18 November 2026, the next published date is 4 March 2027, then 7 July 2027 [source].

The UK writing process is different, and is covered in how to write a UK AI grant application. If you are considering paid bid-writing help, see grant-writing help: when and how to hire.

Open now: grants closing soonest

See all 36 open grants →

More on grants

Frequently asked questions

How long should the Project Pitch be?

NSF sets character limits, not a page count: up to 3,500 characters each for the technology innovation and the technical objectives, and up to 1,750 characters each for the market opportunity and the team. Those are the official limits. Do not treat a third-party template as a substitute for them.

What is the page limit for the Phase I project description?

15 pages, for Phase I and for Phase II. Fast-Track is 16 pages. Do not put URLs in the project description.

How many letters of support do I need?

At least one, and a maximum of three, for a Phase I proposal. They should come from potential customers, partners or investors and speak to a commercial opportunity, not from friends endorsing the team. Consultant or subcontractor commitment letters do not count towards this requirement.

Can I reuse a declined proposal?

Only after a substantial revision, and only with a new invited Project Pitch. You must include a resubmission change description. NSF may return a resubmission without review if it has not clearly considered the major comments from the prior review.

When is the next deadline?

The next published full-proposal deadline after 18 November 2026 is 4 March 2027, at 5 p.m. in the submitting organisation's local time, then 7 July 2027. You need an invitation first, and invitations expire, so check the live solicitation.

Sources

Programme details are quoted from the organisers' pages on the dates shown. advance.to isn't affiliated with any organiser.

  1. NSF America's Seed Fund: About the programme
  2. NSF SBIR/STTR eligibility and requirements
  3. NSF SBIR/STTR Project Pitch information
  4. NSF SBIR/STTR full proposal page
  5. NSF SBIR/STTR Phase I proposal contents and preparation
  6. NSF SBIR/STTR other supplementary documents (letters of support)

Share this page:

Free guide + the Monday email

Get the free guide. Never miss a deadline.

Your First AI Funding Application shows you which AI funding fits you and how to write an application that gets read. Then, every Monday, one short email with the deadlines closing in the next 14 days.